-
Elishéva live@Faneuil Hall
Boston is an incredibly vibrant city and hosts many live events in theatres and outdoor venues. At Boston’s Faneuil Hall, I took some pictures of Elishéva, a soulful jazz singer, while she was rehearsing.
-
Tesla Coils@Boston Science Museum
Not a great photo, taken on the fly at Boston’s Science Museum. Nevertheless, Tesla Coils hold a special place in the hearts of early Command & Conquer players, so I had to take it.
-
Helios 40-2 85/1,5 and Fuji X-T5: a sample
This is an early attempt at using an M42 mount Helios 40-2 85/1,5 coupled with a Fuji X-T5. The lens is not tack-sharp and the APS-C equivalent field of view is around 127mm, therefore the bokeh effect becomes less evident. The results, however, are pleasaning.
-
Guarding Democracy
Maybe it is just me, but I couldn’t get the best out of the Ilford XP2 Super 400.
-
FUJIFILM X-T5 RAF have problems with Affinity Photo 2.1
As this video shows, when opened in Affinity Photo 2.1, an RAF generated by a Fujifilm X-T5 shows a vertical stripe and a slightly higher resolution. The problem does not occur if the file is pre-processed with Iridient Transformer and converted to DNG, or if the file is processed with Pixelmator Pro 3, Lightroom Classic or the latest version of Capture One.
-
A pouch for the Fuji XF 150-600
The JJC Deluxe Lens Pouch model 811 fits perfectly with the Fuji XF 150-600 with the handle mounted and the lens hood reversd. It also leaves some room for filters, SD cards or small accessories.
-
Abstract
-
Niccolò Fabi – Meno Per Meno Tour 2023 – Live@Teatro Massimo, Pescara
Covering Niccolò Fabi’s concert for Rockol, gave me the opportunity to test an X-T4 with an XF 150-600. The image quality is on a par with the X-T3. This was to be expected. However, I have some reservations about the autofocus. The lens also needs to be examined in more detail before I can form an informed opinion.
-
Another experiment, now with a Kodak Portra 400
This is a DSLR scan of an old Kodak Portra 400 roll of film shot during a 2015 concert by John De Leo Grande Abarasse. The editing with Affinity Photo was quite challenging, however, the result is a fair rendition of the film aesthetic.
-
Partner in Glam
-
Processing DSLR-digitized film with and without Pentax K-1 Monochrome Custom Image profile
Digital Camera Utility 5.0 is a pain to use on a Mac with Monterey. It is slow and laggy. Its only use is to get the photo as shot, with the custom image profiles embedded in a K-1 (and other recent Pentax DSLRs), and export it as a 16-bit tiff for further processing.One might wonder, however, whether editing a RAW file without going through the DCU —and thus losing the custom image profile— would produce lower quality results. We are about to find out.The test is quite demanding, as it starts with a shot from an Ilford SP2 Super 400 (note: this is not a true B&W film, as it…
-
Moonshot with a handheld Fuji XF150-600 and a Fuji X-T3
This picture is taken, handheld, with the following parameters: Focal Lenght 600mm, Aperture F/8, ISO 6400, Exposure 1/300s. Even if shot with a Fuji X-T3 (that has no In-Body Stabilisation) the resulting image is very good.
-
Tell me something I do not know…!
This hip shot is the result of a complicated process. It was taken with an expired Ilford XP2 Super 400, a Voigtländer Bessa R2 and a Voigtländer Nokton 35mm f/1.4. Focus was at infinity. There was no time to frame it properly, so in post it was necessary to rearrange the composition with a generous crop.Digitising the film with my homemade rig required 2 stops of underexposure with plus or minus 1 stop of bracketing.The DNG was first processed through DXO Pure Raw, then adjusted and cropped in Affinity Photo, and finally adjusted for simmetry in DXO Viewpoint.
-
Coats
Getting rid of film noise is a recurring necessity when shooting film at (relatively) high ISO.In this photo the negative was digitised using a Pentax K-1 Mark I and a Pentax FA 100/2,8 Macro. Then, before inverting the curves to make a positive, it was fed into DxO PureRaw3 (by the way, it properly recognized the camera and lens). Finally, in Affinity Photo Develop Persona’s Details tab, once the curves were inverted, it was necessary to tweak the Noise Reduction options by setting Luminance to 50% and Luminance Details to 0.
-
Powermeters
This photo was taken with an Ilford XP2 Super 400, a Voigtländer Bessa R2 and a Voigtländer 35mm f/1.4 II lens. The film was digitised using a Pentax K-1 and a Pentax FA 100/2.8 Marco mounted on a custom-built rig. The resulting raw was processed in Affinity Photo. In Develop Persona, first the image was turned in black and white, then the master curve was intverted and finally exposure, contrast and other parameters were tweaked.
-
Editing a photo taken with a Carl Zeiss Jena 135/4 Sonnar and a Fuji X-T3
A vintage Carl Zeiss Jena 135/4 Sonnar whose RF mount has been replaced with a Fuji X mount by Adriano Lolli (https://www.adrianololli.com).Coupled with a Fuji X-T3, it delivers pleasant results. Post production is highly subjective, so the final outcome might no be ‘acceptable’ to some taste. Still, the lens is very good.
-
A sample of the Carl Zeiss Jena 135/F4 Sonnar and a Fuji X-T3
This photo was taken with an old Carl Zeiss Jena 135/4 Sonnar whose Contax RF mount was replaced by a Fuji X mount by Master Adriano Lolli.
-
Floating
The Panasonic TZ100 is a very good travel camera. Its one-inch sensor allows a fair balance between performance and portability. Being slightly bigger of trendy smartphones, this camera delivers a way more better results.
-
Unattainable 1:1 magnification with the JJC FDA S-1 and Micro Nikkor 60 2,8
The JJC FDA S-1 does not allow a 1:1 magnification with the Micro Nikkor 60 2,8. It only reaches a smaller factor (about 80%.The probable reason is the excessive lenght of the original step-down ring.Using a thinner step-down ring, as it has been done in this video, does not improve the outcome.
-
Processing a DSLR Digitised Black and White Film with Affinity Photo
This videos shows how to process a Black and White film digitised with a DSLR camera.The process starts from opening the RAW file in Affinity Photo’s Develop Persona. In short and in order, the steps are:
-
DSLR film scanning: episode three
This is, by far, the most pleasing result I have ever had from digitising a film negative with a DSLR.Contrary to many suggestions found on Youtube, I did not invert the negative RAW curve by tweaking the Master RGB option. I did it, instead, channel-bychannel minding each clipping point. This approach allowed for a better reproduction of the grey tones, and in the end a fair result.
-
Another attempt at DLSR film scanning
Still trying.I digitised the negative with a Pentax K-1 and the FA 100 2.8 Macro lens using the JJC clone of Nikon ES-2. Postproduction is done in Pixelmator Pro. I used a Nikon 35TI and a Kodak BW400CN to take the original photo. Strangely enough, the JJC does not allow a 1:1 ratio with the Micro Nikkor 60 2.8.The instructions advise to mount the 62mm to 52mm step-down ring, the #2 52mm barrel-shaped tube and finally the film holder. These instructions are clearly wrong, as it is not possible to get 1:1 magnification with this setup.So I removed the tube and mounted the film carrier directly on the 62mm to…
-
An attempt at DSLR-made film digitization
This is the first usable result of the attempt to DSLR-scan films. I tried several approaches, including the standard tripod holding the camera perpendicularly to a flat, LED-lighted surface. However, I finally went for a different solution: a horizontal rig with two moving plates, a micrometric head holding the film and three-axis and a panoramic head holding the camera.
-
Pixelmator Pro Debanding and Electronic Shutter
Pixelmator Pro Deband feature does not work on banding caused by the well known electronic shutter lag. The Deband feature has not been advertised as working also with ES-induced banding, so the fact that it can not handle it is not a bug. However, this limit seriously reduces the appeal of the new feature. I have flagged the issue to Pixelmator Pro Support: currently, they are out of work, but eventually, they should get back to me with some news. Good news, hopefully.
